|
|
|
|
 |
|
|
 |
|
|
Portable
Glove Box Assembly Instructions
|
Your
Portable Glove Box should be equiped with the following:
- (1)
- Portable Glove Box
- (2)
- Long 31" supports
- (4)
- Short 20" supports
- (4)
- Legs
|
|
|
Step
1:
Run
the Long 31" supports through each side of cable ties that
run along the top of the glove box.
|
|
|
Step
2:
Construct
both of the frame sides by using (2) of the shorter 20" supports
connected to (2) of the legs as shown to the right.
|
|
|
Step
3:
Connect
each side of the frame to the longer 31" supports.
|
|
|
Step
4:
Secure
completely.
|
|
|
Tips:
- When
using The Portable Glove Box, its best to use some kind of
latex glove. The reason is because there is no powder lining
in the gloves. So if you plan on working for long periods
of time, your hands will sweat and often stick to the inside
of the glove.
- During
assmebly, if you find that your Portable Glove Box isn't stretching
into its full shape, it probably needs some air. Simply open
one of the ports or pull back one of the gloves. This will
allow air to enter the Portable Glove Box and the suction
effect will be eliminated.
|
|
To
Place an Order Call Us Toll Free at 1-800-948-MYCO (1-800-948-6926)
Business Hours: Eastern Standard Time (EST)
9:00 AM until 5:00 PM - Monday thru Friday
Myco
Supply
P.O. Box 15194
Pittsburgh, PA 15237
©
Copyright 2002, Myco Supply Company, Inc., All rights reserved.
